6MR200A-4 PRV 6.5″ Midrange

PRV 6.5″ Midrange Car Speaker 6MR200A-4 200 Watts / 4 Ohm PRO Loudspeaker

PRV Audio’s ALTO Series were carefully crafted and voiced to reproduce a natural, smooth sound while remaining dynamic. To get the superior fidelity, a special composite cone is used to smooth frequency response and to keep the moving mass low, increasing the efficiency. The 6MR200A-4 midrange speaker is our solution for PROAudioOnWheels® for Car audio systems.

• 6.5″ Car audio midrange speaker designed for Low Frequencies with shallow profile
• 200 watts RMS program power gives capability of high acoustical output with small amplifier
• Impressive choice for high output, car audio, and custom systems – 4 Ohm Impedance
• Smooth response through the mid-bass and vocal range at at loudest volumes

GENERAL SPECIFICATIONS

Nominal Diameter	6.5″ (165 mm)
Nominal impedance	4 Ohm
Nominal Power Handling	100 Watts
Continuous Program Power (RMS)	200 Watts
Max Peak Power	400 Watts
Sensitivity 2.00V at 1m	94 dB
Recommended Hi Pass Crossover* *For Full Power Handling	150 Hz** **12db Per Octave Crossover
Frequency Response at -10dB	155 – 11,000 Hz
Voice Coil Diameter	1.5″ (38 mm)
Voice Coil Wire	Copper
Voice Coil Winding Depth	8.0 mm
Former Material	Kapton
Magnetic Gap Depth	5.5 mm
Frame Material	Stamped Steel

THIELE-SMALL PARAMETERS

Equivalent Volume	Vas	3.89 l
Excursion (mathematical)***	Xmax	2.62 mm
Free Air Resonance	Fs	138.3 Hz
Mechanical Factor	Qms	9.47
Electrical Factor	Qes	1.08
Total Factor	Qts	0.97
Cone Area	Sd	137 cm²
Mechanical Mass	Mms	8.89 g
Bl Factor	Bl	4.92 Tm
Dc Resistance	Re	3.4 Ohm
Inductance	Le	0.18 mH at 1 kHz
Mechanical Mass Without Air	Mmd	7.98 g
Mechanical Compliance	Cms	0.149 mm/N

 

EXTRA INFO

Overall Diameter	6.59″ (167.5 mm)
Front Mount Baffle Cutout	5.69″ (144.5 mm)
Mounting Depth	2.24″ (57 mm)
Overall Depth	2.50″ (63.5 mm)
Net Weight	3.52 Lbs (1.60 kg)
Shipping Weight	3.79 Lbs (1.75 kg)
Carton Dimensions W x L x H	7.40″ x 7.48″ x 4.45″ (188 x 190 x 113 mm)